Všechny komentáře k produktu:ASUS Z170 PRO GAMING - Intel Z170
Z170 progaming a Samsung 960 EVOfilip118 14. 12. 2016 11:01
Dobrý den, rád bych se zeptal, jestli mohu do desky Z170 pro gaming vložit do m.2 slotu ssd disk samsung 960 EVO. Někde jsem četl, že není podporován na všech deskách. Kde si mohu ověřit, že to bude ok?
ahoj, tiez by ma to zaujimalo.. nasiel som na nete navod, ktory dnes vyskusam:"I had the same problem but sorted it as follows, make sure you have the latest BIOS installed - mine is now on 2003 link here http://dlcdnet.asus.com/pub/ASUS/mb/LGA1151/Z170-PRO-GAMING/Z170-PRO-GAMING-ASUS-2003.zip1 - Make sure you unplug all SATA and USB drives, the M.2 drive has to be the only drive installed.2 - Go into the bios, under the boot tab there is an option for CSM, make sure it is disabled.3 - Click on secure boot option below and make sure it is set to other OS, Not windows UEFI.4 - Click on key management and clear secure boot keys.5 - Insert a USB memory stick with a UEFI bootable iso of Windows 10 on it, USB3 is quicker but USB2 works also. A Windows DVD won’t work unless you’ve created your own UEFI Bootable DVD.6 - Press F10 to save, exit and reboot. 7 - Windows will now start installing to your NVME drive as it has its own NVME driver built in, I don't think this would work with previous versions.8 - When the PC reboots hit F2 to go back into the BIOS, you will see under boot priority that windows boot manager now lists your NVME drive.9 - Click on secure boot again but now set it to WIndows UEFI mode.10 - Click on key management and install default secure boot keys11 - Press F10 to save and exit and windows will finish the install.Once you have Windows up and running, shutdown the PC and reconnect your other SATA drives. Do not put anything on SATA port 1 as this is now reserved for the NVME drive.I would also recommend installing the Samsung NVME driver at this point to replace the Windows one.The background here is NVME SSDs do not appear within the BIOS until Windows creates the system partition with the EFI Boot Sector.Your M.2 SSD contains UEFI driver information within the firmware. By disabling the CSM module Windows will read and utilize the M.2-specific UEFI driver."